Rockford Fosgate P300-12 Review

When spending a lot of time in your car, an excellent audio system will help assure that you enjoy this time. Now, if you are planning on putting more bass inside your ride without the stress of matching up subwoofers with the right enclosure and amp, Rockford Fosgate P300-12  is perfect for you.

Fosgate has already matched up an amp, sub and enclosure, which enables you to avoid all the complicated calculations you need to know before buying, they made this extremely easy. This unit is an “all-in-one” solution if you want more rich bass to your factory or amplified system.

This unit features a 12” subwoofer that is sealed in a custom tuned enclosure powered by the internal 300-watt amplifier. Let’s take a look on this trusted Rockford Fosgate p300-12 review.

Rockford Fosgate P300-12 Review – How is it different from others

The best thing about the impressive Rockford p300-12 is that it really offers convenience due to the wiring harness that could be disconnected in a just a matter of minutes. Once you have limited amount of space in your trunk, then you can easily connect and disconnect the release connecters very quickly and at the same time remove it from the trunk.

In addition, this 12” unit is the ideal system for majority of music lovers out there, given that it will offer enough volume together with less vibration.

The 300-watt amp is attached to the subwoofer and box without having to buy additional wires and an additional subwoofer enclosure and that itself will save you a respectable amount of money. Another thing is that the subwoofer is extremely simple to setup, thus you can almost start to listen to your favorite music and tunes right away!

Rockford Fosgate P300-12 Review – What new features does this system have?

Rockford Fosgate P300-12 Review

Rockford Fosgate p300-12 is equipped along with high quality technology, which will offer our fellow music fanatics clean bass and precise punch without the extra rattle noises you may get from poorly constructed subwoofer enclosures that so many car audio shops sell.

The whole installation is very simple for most DIY installers, generally here in the shop the installation takes about 2 hours depending upon the vehicle.

If you would like to learn how to install an amplifier and subwoofer into our vehicle we took the time to create a DIY guide that lists all of the proper tools you might need and walks you through an amp and sub install step by step HERE!

Rockford Fosgate p300-12 review – Specifications

  • Closed-loop” design ensures optimum performance between woofer, enclosure and amplifier
  • Built-in bass boost EQ
  • Separate low level and high level speaker level inputs
  • auto turn on/off function
  • overheating and peak voltage protection
  • Remote-bass level input along with volume control module included
  • Constructed with top quality 5/8″ MDF
  • Detachable Power/Ground connector harness
  • Covered with top quality industrial high heat activated vinyl
  • Proprietary high output subwoofer
  • High-efficiency, low current design
  • adjustable 12db/Octave low pass crossover
  • Built-in 0°/180° phase switch
  • Large AWG input terminals

Rockford Fosgate P300-12 Review – Overall assessment

Rockford Fosgate P300-12

Now if you are considering having a speaker system upgrade, then it is advisable that you buy a subwoofer as well to provide the low frequencies in every song that your cars inside speakers cannot produce.

Most music enthusiast understand the need of a subwoofer in a vehicle but some do not but it certainly could improve the performance of your speakers because a subwoofer will be responsible for all of your low frequencies (bass). This allows you to take a lot of the bass out of your in-car speakers, taking away a lot of the frequencies they cannot be produces properly and allowing them to be played louder.

Rockford Fosgate P300-12